Amethyst Aura Melt & Pour Soap Recipe

Amethyst Aura Melt & Pour Soap Recipe

The beautiful creamy purple color scented with boldly tart black currant and rich tobacco bar, punctuated with bright lemon and undertones of wood smoke.

Level: Easy

Yield: 8 Bars

Time: 2 hours

Supplies: 

Directions: 

Step 1: Melt 7.5 ounces of the Most Clear MP soap base in 30 second intervals in the microwave until the soap base is in a fluid state. Add 0.3ounces of the Amethyst Aura Fragrance Oil. Stir. Set aside. 

Step 2: Melt 7.5 ounces of the GoatMilk Melt & Pour Soap. Once fluid, add 2-5 drops of the purplesoap dye and 0.3 ounces of the AmethystAura Fragrance Oil. Stir. 

Step 3: Pour the clear soap into the loaf mold. In random spots throughout the mold, pour some of the purple melted soap. 

Step 4: Spray with isopropyl alcohol. Allow to fully set up. 

Step 5: Melt 7.5 ounces of the clear soap base in 30 second intervals in the microwave until the soap base is in a fluid state. Add 0.3 ounces of the Amethyst Aura Fragrance Oil and 2-4 drops of the purple soap dye. Stir. Set aside. 

Step 6: Melt 7.5 ounces of the Goat Milk Melt & Pour Soap. Once fluid, add 0.3 ounces of the Amethyst Aura Fragrance Oil. Stir. 

Step 7: Spray the set-up soap with alcohol. Then, pour the light purple soap into the mold. Pour the dark purple soap in random spots in the mold. Again, spray the soap with alcohol to remove air bubbles. Allow the soap to set up. 

Step 8: Cut 10.8 ounces of the clear soap base into various sized chunks to resemble crystals. Set aside. 

Step 9: Melt 7.5 ounces of the Goat Milk Melt & Pour Soap. Once fluid, add 2-5 drops of the purple soap dye and 0.3 ounces of the Amethyst Aura Fragrance Oil. Stir. 

Step 10: Spray the soap that is in the mold with alcohol. Pour about ¾ of the melted purple soap into the mold. Spray with alcohol.

Step 11: Place the clear soap chunks in the mold. Cover the entire surface of the loaf. Pour the remaining soap in the mold where needed to hold the smaller pieces in place. 

Step 12: Allow the soap to set up. Remove the soap from the mold and cut.

!