Christmas Tree Mold Candle Recipe

In a pouring pot, weight out 3 oz. ProBlend650.

While you are waiting, poke a hole in the bottom of your mold for the wick. We used a metal skewer to do this.

Thread a wick through the hole of your mold.

Using a double boiler, melt the wax to 180F. Stir occasionally as the wax is melting.

Add 0.3 ounces of the Black Cypress and Cedar Fragrance Oil. Stir.

Pour the wax into your mold at 160F-165F.

Center the wick, secure it with a wick bar, and allow the candle to mostly set up. You want to the wax to be warm to the touch, soft but solid.

In a pouring pot, weight out 4.25 oz. ProBlend 650. Add 1-2 red dye chips.

Using a double boiler, melt the wax to 180F. Stir occasionally as the wax is melting.

Add 0.42 ounces of the Black Cypress and Cedar Fragrance Oil. Stir.

Pour the wax into your mold. Center the wick, secure it with a wick bar, and allow the candle to set up.

If you used a tabbed wick, remove the tab. Remove the candle from the mold.

Trim the wick. Place a warning label on the bottom of the candle.

Once cured, trim the wick to ¼” before burning.