Loading... Please wait...

EcoSoya CB-XceL Soy Wax Flakes - 50 lb. Case

In Stock

Out of Stock

Sorry but this item is currently unavailable.

Please check back at a later stage.

Bulk Discounts for EcoSoya CB-XceL Soy Wax Flakes - 50 lb. Case

Below are the available bulk discount rates for each individual item when you purchase a certain amount

  • Buy 5 or above and pay only $72.99 each
  • Product Description

    EcoSoya CB-Xcel Soy Wax

    EcoSoya CB- Xcel is a single pour container soy wax with extreme resistance to bloom and “wet spots.”

    Melt Point: 125°

    Suggested Pouring Temperature: 110 - 155°

    Advantages of using EcoSoya CB-Xcel:

    • Requires only one pour and allows for top surface re-melting
    • Can be shipped in warmer climates due to the higher melt point
    • Maintains an even burn pool with consistent color retention
    • Excellent scent throw
    • High fragrance load - 10% fragrance loads are possible
    • Smooth and creamy look
    • Pre-blended; no additives required
    • Comes in flake form

    Basic Guidelines:

    • Heat wax to around 180° - 190°
    • Add dye if desired and mix thoroughly
    • Add candle fragrance if desired and mix thoroughly
    • Pouring temperatures should typically be around 130° to 155°, though experimentation is recommended to determine optimal pouring temperature (larger candles should be poured at a higher temperature and smaller candles should be poured at a lower temperature)
    • Allow candles to cool as slow as possible to achieve good jar adhesion and create a smooth finish
    • Wait at least 48 hours before burning
    • Wick testing is recommended to achieve optimal burning characteristics and will vary with different combinations of wax, fragrance, dye, and container size

    Tips for Using EcoSoya CB-Xcel:

    • Optimal pouring temperatures will vary by container type/size and additives used
    • The liquid wax should begin solidifying within 30 minutes. If the wax does not start solidifying within 30 minutes, the pouring temperature was too high
    • Larger candles may require a higher pouring temperature (155°), while smaller candles may require a lower pouring temperature (130°)
    • When pouring at a lower temperature, add the dye and fragrance at a temperature of 140° or higher
    • Adjusting the pouring temperature can help with frosting or imperfections should they occur
    • Allow candles to cool as slow as possible
    • Use caution when using EcoSoya Xcel by not allowing the wax to heat above 190° as it may lead to wax discoloration

    Need Less Than 50 lbs.?

    Click here for quantities of CB-Xcel less than 50 lbs.

  • Product Reviews

    Write Review

    This product hasn't received any reviews yet. Be the first to review this product!